An ISO 9001:2015 Certified Company
An ISO 9001:2015 Certified Company
AVAILABLE IN STEEL/STAINLESS STEEL
Manufactured to approx. DIN15237
ISO grade 5.8 (exceeds DIN15237)
Large bolt head diameter
Fully threaded
Available as zinc plated, self-colour or stainless
| Bolt, hex nut, small washer (boxed/100) - weight Kg/100 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| REF. | HEAD Ø (mm) | MAX. BOLT TORQUE (Nm) | BOLT LENGTH (measured overall) | |||||||||
| 20 (mm) | 22 (mm) | 25 (mm) | 30 (mm) | 35 (mm) | 40 (mm) | 45 (mm) | 50 (mm) | 60 (mm) | 70 (mm) | |||
| M6 | 21 | 8 | 1.28 | - | 1.38 | 1.50 | - | - | - | - | - | |
| M7 | 23 | 13 | 1.82 | 1.94 | 2.10 | 2.16 | 2.22 | - | - | - | - | |
| M8 | 28 | 20 | 2.98 | 2.00 | 3.00 | 3.02 | 3.37 | 3.72 | 3.88 | 3.94 | - | - |
| M10 | 35 | 36 | - | - | 5.42 | 5.43 | 5.44 | 5.84 | 6.02 | 6.18 | - | - |
| M121) | 42 | 65 | - | - | - | - | - | 9.24 | - | 4.96* | 5.36* | 5.60* |
| Not available in stainless steel / * Packed in 1000’s / ** Packed in 250’s | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| REF. | BOLT LENGTH (measured overall) | Qty | |||||||||
| 20 (mm) | 22 (mm) | 25 (mm) | 30 (mm) | 35 (mm) | 40 (mm) | 45 (mm) | 50 (mm) | 60 (mm) | 70 (mm) | ||
| M6 | 19.4 | - | 20.8 | 21.4 | - | - | - | - | - | - | 2000 |
| M7 | 20.1 | 21.3 | 22 | 24.2 | 17.5* | - | - | - | - | - | 1500 |
| M8 | 10.1 | 11.1 | 11.3 | 12.3 | 13 | 13.7 | 14.3 | 14.9 | - | - | 500 |
| M10 | - | - | 18.8 | 20 | 21 | 22.3 | 23.7 | 12.6** | - | - | 500 |
| M121) | - | - | - | - | 15.9 | 16.7 | 17.7 | 18.7 | 20.8 | 23.2 | 250 |
AVAILABLE IN STEEL / STAINLESS STEEL
Steel – ISO grade 5.8 (exceeds DIN 15237)
Concave head with 4 lugs on the underside to prevent rotation when tightening
Hexagon nut and small flat washer included.
Available in Whitworth thread or metric thread
Zinc plated (self colour on special request)
Bolt torque rating dependent on bucket & belt size
| REF. | HEAD Ø (mm) | MAX. BOLT TORQUE (Nm) | BOLT LENGTH (measured from under the bolt head) Kg/100 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1⁄2” 12 (mm) | 3⁄4” 20 (mm) | 1” 25 (mm) | 1 1⁄4” 30 (mm) | 1 1⁄2” 40 (mm) | 1 3⁄4” 45 (mm) | 2” 50 (mm) | 2 1⁄4” 55 (mm) | 2 1⁄2” 65 (mm) | |||
| 1⁄4” BSW M6 | 17 | 5 | 1.04 | 1.18 | 1.24 | 1.48 | 1.56 | - | - | - | - |
| 5⁄16” BSW M8 | 23 | 10 | - | 2.08 | 2.38* | 2.54* | 2.90* | - | 3.24 | - | - |
| 3⁄8” BSW M10 | 27 | 18 | - | - | 3.94 | 4.44* | 4.80* | 5.08* | 5.36* | 5.50 | 5.72 |
| 1⁄2” BSW M12 | 35 | 42 | - | - | - | 7.44 | 7.78 | 8.12 | 8.44 | 9.08 | - |
| REF. | Ø | (mm) | Kg/100 |
|---|---|---|---|
| LOW1 | 1⁄4” M6 | 33/45 | 1.44 |
| LOW2 | 5⁄16” M8* | 37/50 | 2.22 |
| LOW3 | 3⁄8” M10* | 45/57 | 2.90 |
| LOW4 | 1⁄2” M12* | 53/63 | 3.94 |
AVAILABLE IN STEEL/STAINLESS STEEL
Supplied with small washer and nylon insert locknut
Shank formed with hexagon tip. Special tool grips this hexagon, stopping bolt rotation while simultaneously driving the self-locking nut on (or off) in one easy operation
Speeds fitting and removal of bolts
Improves elevator safety
Reduces belt damage caused by standard bolts ‡ UNF thread
Bolt torque rating dependent on bucket & belt size
| REF. | HEAD Ø (mm) | MAX. BOLT TORQUE (Nm) | BOLT LENGTH (measured from top of the head to end of the thread) Kg/100 | |||||
|---|---|---|---|---|---|---|---|---|
| 3⁄4” | 1” | 1 1⁄4” | 1 1⁄2” | 1 3⁄4” | 2” | |||
| 1/4’’ UNF | 25 | 12 | 1.82 | 1.88* | 2.04 | - | - | - |
| 5/16’’ UNF | 30 | 25 | 2.84* | 3.02* | 3.24 | 3.48 | 3.68 | - |
| 3/8'' UNF | 32 | 46 | - | 4.56 | 4.70* | 5.10* | 5.50 | 5.90 |
AVAILABLE IN STEEL/STAINLESS STEEL
Unique Design - fangs bite into belt, locking bolt in place while nut is tightened
Eases fitting and removal of nut
Large bolt head diameter = maximum resistance to pull through
Flat bolt head - pulls fully flush into belt – reduces risk of rip out of bolt due to head protruding from back of belt
Suitable for recessed or non-recessed bolt holes
Ideal for CC-S buckets
Bolt torque rating dependent on bucket & belt size
| REF. | HEAD Ø (mm) | MAX. BOLT TORQUE (Nm) | BOLT LENGTH (measured overall) Kg/100 | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 20 (mm) | 25 (mm) | 30 (mm) | 35 (mm) | 40 (mm) | 45 (mm) | 80 (mm) | |||
| M6 | 25 | 11 | 1.56 | 1.82 | - | - | - | - | - |
| M8 | 30 | 27 | - | 2.76 | 2.02 | - | 3.24 | - | - |
| M10 | 27 | 47 | - | - | 4.90 | 5.12 | 5.34 | 5.56 | - |
